Edan i15Vet Blood Gas and Chemistry Analyzer
Portable point-of-care blood gas and chemistry analyzer running a single disposable cartridge, with a 7-inch 800x480 display and battery for 50 samples.
ICEN supplies selected professional medical equipment. Product availability and market authorization vary by country.
Blood gas at the patient side, on one cartridge
The i15Vet is Edan’s point-of-care blood gas and chemistry analyzer for veterinary critical care. Everything needed for a run is in one disposable cartridge, and Edan describes the operating procedure as three steps with no maintenance routine — no tubing to flush, no electrodes to replace between runs.
The device is built to move: it is described as lightweight and portable, runs from a 4200 mAh rechargeable lithium-ion battery rated for 50 samples continuously, and accepts 100 to 240 V AC when a socket is available.
The interface is a 7-inch colour LCD at 800 by 480. In practice this is the analyzer you use when an emergency case needs a gas, electrolyte or metabolite answer before the next decision rather than after a laboratory turnaround.
Applications
- Emergency and critical care triage
- Anaesthesia monitoring
- Intensive care follow-up
- Field and satellite clinic testing
Who is this product for?
- Emergency and critical care practice
- Referral hospitals
- Field and ambulatory practice
- Teaching hospitals
Selected Product Highlights
Specifications below are presented from the current ICEN product catalog. Confirm final configuration and technical documents with our team before purchase.
Single disposable cartridge per run.
Three-step operation with no maintenance routine.
Lightweight, portable form factor.
7-inch 800x480 colour LCD.
4200 mAh lithium-ion battery rated for 50 samples continuously.
100 to 240 V AC input.
Edan i15Vet Blood Gas and Chemistry Analyzer - key specifications
| Brand | Edan |
|---|---|
| Model | i15Vet |
| Category | Blood gas and chemistry analyzer |
| Format | Portable point-of-care |
| Cartridge | Single disposable cartridge |
| Operation | Three steps, maintenance-free |
| Display | 7 in colour LCD, 800 x 480 |
| Battery | 4200 mAh lithium-ion |
| Battery capacity | 50 samples continuous |
| Power input | 100 to 240 V AC |
| Measured parameters | Not published on the product page |
| Weight | Not published |
Point-of-care blood gas answers the question the patient is asking now. Chemistry panels answer the wider diagnostic question. Most emergency practices end up with both rather than choosing one.
Common questions about Edan i15Vet Blood Gas and Chemistry Analyzer
What can it measure?
Edan does not list the measured parameter set on the i15Vet product page, because it depends on the cartridge type ordered. Ask ICEN for the cartridge menu covering blood gas, electrolytes and metabolites.
Is there any maintenance?
Edan describes the i15Vet as maintenance-free, with a three-step operating procedure and a single disposable cartridge per run.
How many samples on a charge?
The 4200 mAh lithium-ion battery is rated for 50 samples of continuous testing.
How does it compare with the VetXpert C5?
The C5 runs chemistry panels for routine and pre-anaesthetic screening. The i15Vet is a point-of-care blood gas and chemistry device aimed at critical care, where speed at the patient side matters more than panel breadth.
Can it be used in the field?
It is built as a portable unit with a battery rated for 50 samples, which suits ambulatory and field work. Edan does not publish ingress protection on the product page, so ask ICEN if the unit will be used outdoors.
What is not published?
Measured parameters, weight and dimensions are not stated on the product page. Ask ICEN for the datasheet with the cartridge configuration you intend to buy.
Related products and resources
Need a quotation or product configuration?
Send the model, estimated quantity, destination market and required configuration - our export team will reply with availability, documentation and pricing.